To Next Page
C
Calvin PattersonJul 26, 2025
Why is my Echo SRM-210 - 02-04 Brush Cutter engine cranking but hard to start?
- JJeff BowenJul 26, 2025
If your Echo Brush Cutter engine cranks but is hard to start, or doesn't start at all, the possible causes include a clogged fuel strainer or fuel line, or an issue with the carburetor. You can try to clean or replace the fuel strainer and fuel line. Also, the fuel mixture might be too rich. In that case, open the choke, clean or replace the air filter, or adjust the carburetor. The spark gap might also be incorrect, covered with carbon, fouled with fuel, or the plug might be defective. Adjust the spark gap to 0.70mm (0.026 in.), clean or replace the spark plug.
General
