To Next Page
M
Miss Jennifer KingJul 26, 2025
Why my Echo SRM-210 - 12-03 SERIAL NUMBER 07004402-07999999 engine cranks but won't start?
- JjessicabeckJul 26, 2025
If your Echo Brush Cutter engine cranks but is hard to start or doesn't start at all, several factors could be at play. The fuel strainer or fuel line might be clogged, or there could be an issue with the carburetor. Try cleaning or replacing these parts. If the fuel mixture is too rich, open the choke, clean or replace the air filter, or adjust the carburetor. Also, ensure the stop switch is in the ON position. Check the spark plug gap and adjust it to 0.70mm (0.026in.), and clean or replace the spark plug if it's covered with carbon or fouled with fuel. If these steps don't resolve the issue, consider consulting your Echo dealer.
General
