Echo SRM - 2110 User Manual

Grass Trimmer/Brush Cutter
Operator's Manual
MODELS, SRM - 2100, 2110
Serial Number 001001 & Up
MODELS, Type 1E SRM - 2100, 2110
Serial Number 001001 & Up
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a
Safety Manual. Both must be read and understood for proper and safe operation.
WARNING
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
X7702270500
X770000030
02/99

Echo SRM - 2110 Specifications

General

Brand	Echo
Model	SRM - 2110
Category	Trimmer
Language	English

Summary

Introduction to ECHO Trimmer Manuals

Operator's Manual Content

Details specifications and operational information for the ECHO trimmer.

Safety Manual Content

Explains hazards and safety measures for using ECHO trimmers and brush cutters.

Safety Symbols and Product Description

General Trimmer Component Description

Illustrates and describes the main parts of the ECHO grass trimmer/brush cutter.

Unit Decals and International Symbols

Understanding International Symbols

Provides meanings for various international symbols found on the ECHO equipment.

Equipment Checks and Fuel Handling

Pre-Operation Equipment Checklist

Lists essential checks for the ECHO unit before starting operation to ensure safety.

Operator Safety and Personal Preparedness

Safety Gear and Personal Protective Measures

Covers physical condition, eye, hand, hearing protection, and appropriate clothing for safe operation.

Safe Operation and Area Setup

Determining a Safe Operation Area

Instructs on clearing the area and maintaining a safe distance for bystanders.

Safe Operating Techniques and Stance

Covers proper grip, stance, and avoiding hot surfaces during operation.

Extended Use and Health Risks

Vibration, Cold, and Finger Health

Explains potential effects of vibration and cold on fingers and provides preventive measures.

Repetitive Stress Injury Prevention

Covers risks like RSI and CTS, and suggests methods to reduce them.

Product Description and Blade Systems

Package Contents Checklist

Lists all items included in the package for user verification.

Blade System Compatibility

Explains blade convertibility and requirements for different ECHO trimmer models.

Emission Control System Information

ECHO Trimmer Technical Specifications

Trimmer Assembly Procedures

Plastic Shield Installation Guide

Instructions for installing the plastic debris shield for nylon line operation.

Nylon Line Head Attachment

Step-by-step guide for attaching the nylon line cutting head.

Blade Installation and Shielding

Metal Shield Installation Steps

Steps for attaching the metal shield required when using blades.

Cutting Blade Mounting Instructions

Instructions on how to properly mount the cutting blade onto the unit.

Harness Clamp Installation

Throttle Linkage and Front Handle Setup

Front Handle Positioning and Securing

Steps for positioning and securing the front handle for optimal operator comfort.

U-Handle Installation Guide

Pre-Operation and Blade Usage Guidance

Preparing for Blade Operation

Details the necessary configuration and precautions for operating with blades.

Fuel Requirements, Handling, and Storage

Fuel Specifications and Safe Handling

Specifies gasoline/oil types and safe refueling/storage practices.

Fuel Storage Best Practices

Offers advice on proper storage of fuel to maintain its quality and safety.

Pre-Operation Checks and Safe Area Setup

Equipment Pre-Operation Checks

Lists vital checks for the unit before starting operation.

Safe Operation Area Determination

Instructs on clearing the area and maintaining a safe distance for bystanders.

Operation and Cold Engine Starting

Cold Engine Starting Procedure

Step-by-step instructions for initiating engine start-up from a cold state.

Warm Engine Starting and Stopping Procedures

Warm Engine Starting Procedure

Instructions for starting the engine when it is already warm.

Safe Engine Stopping Procedure

Details the correct procedure for safely shutting down the engine.

Maintenance Program and Intervals

Maintenance Skill Level Definitions

Defines different skill levels required for various maintenance tasks.

Recommended Maintenance Intervals

Provides a schedule for maintenance tasks based on usage intervals.

Air and Fuel Filter Maintenance

Air Filter Cleaning and Inspection

Instructions for cleaning and inspecting the air filter element.

Fuel Filter Inspection and Replacement

Steps for inspecting and replacing the fuel filter.

Spark Plug and Cooling System Maintenance

Spark Plug Maintenance and Adjustment

Instructions for removing, cleaning, and adjusting the spark plug gap.

Cooling System Cleaning Guide

Guidance on cleaning the engine's cooling fins to prevent overheating.

Exhaust System Spark Arrestor Maintenance

Spark Arrestor Screen Cleaning Procedure

Instructions for removing, cleaning, and inspecting the spark arrestor screen.

Carburetor Adjustment for Emission Models

Type 1E Emission Models Carburetor Adjustment

Specific carburetor adjustment procedures for emission-controlled models.

Carburetor Adjustment for Non-Emission Models

Type 1 Non Emission Models Carburetor Adjustment

Specific carburetor adjustment procedures for non-emission models.

Idle Speed Adjustment Procedure

Instructions for setting the engine's idle speed correctly.

Lubrication and Nylon Line Replacement

Gear Housing and Drive Shaft Lubrication

Steps for checking and adding grease to the gear housing and drive shaft.

Nylon Line Replacement Process

Procedure for replacing the nylon trimmer line on the head.

Sharpening Metal Blades

8-tooth Blade Sharpening Guide

Detailed steps for sharpening the 8-tooth metal blade using specific tools.

Troubleshooting Common Engine Problems

Long Term Storage Procedures

Servicing Information and Support Resources

Parts, Service, and Support Contacts

Contact information for obtaining parts, authorized service, and consumer product support.

Manuals and Ordering Information

Details on how to obtain additional manuals and parts catalogs.