To Next PageTo Next Page
Need help?Do you have a question about the Echo SRM-210 and is the answer not in the manual?
General| Engine Displacement | 21.2 cc |
|---|---|
| Shaft Type | Straight |
| Engine Type | 2-stroke |
| Fuel Capacity | 400 ml |
| Cutting Width | 17 inches |
| Fuel Tank Capacity | 0.41 liters |
| Starter System | i-30 |
Explains the meaning of 'IMPORTANT' and 'NOTE' messages for unit protection and tips.
Ensures operator is physically fit and wears appropriate safety gear for safe operation.
Addresses risks of vibration and cold exposure, offering precautions for extended use.
Provides guidelines to minimize risks of Repetitive Stress Injury (RSI) and Carpal Tunnel Syndrome (CTS).
Instructions on maintaining a firm grip, balance, and footing for safe operation.
Explains the 300-hour compliance period for engine emissions and maintenance requirements.
Lists all parts included with the trimmer/brush cutter unit and their quantities.
Step-by-step instructions for installing the plastic debris shield for nylon line operation.
Procedure for attaching the nylon line trimmer head to the drive shaft.
Details required kits and configurations for using blades on the trimmer/brush cutter.
Guidance on selecting the appropriate blade matched to material type and size for safe cutting.
Specifies the type of gasoline and two-stroke oil required for proper engine operation.
Step-by-step guide for correctly mixing fuel and oil for the two-stroke engine.
Provides essential safety warnings and precautions for handling flammable fuel.
Instructions for starting the engine when it is cold, emphasizing choke and primer use.
Procedure for starting the engine when it has been recently used and is warm.
Defines skill levels (1-3) for maintenance tasks to guide user involvement.
Procedure for inspecting and cleaning the spark arrestor screen for emissions control.
Recommends professional cleaning of the cylinder exhaust port for emission system maintenance.
Notes that carburetor adjustments should only be made after the engine has been broken in.
Instructions for adjusting the engine's idle speed to maintain proper operation.
Steps for checking and adding grease to the gear housing for proper lubrication.
Procedure for lubricating the flexible cable within the drive shaft housing.
Detailed procedure for preparing the unit for storage exceeding 30 days.
Details on obtaining parts, warranty service, and locating authorized dealers.
Contact for assistance, warranty registration, and obtaining replacement manuals.
