EasyManuals Logo
Home>Echo>Trimmer>SRM-210

Echo SRM-210 User Manual

Echo SRM-210
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26
CARBURETOR ADJUSTMENT
Engine Break-In
New engines must be operated for a minimum of two tanks of fuel
before carburetor adjustments can be made. During the break-in period,
your engine performance will increase and exhaust emissions will
stabilize. Idle speed can be adjusted as required.
High Altitude Adjustment
High altitude adjustment is not required for proper operation of this
engine.
Idle Speed Adjustment
Idle speed adjustment may be required periodically to comply with
specifications for this unit. See page 11, "Specifications," for correct
idle speed.
Level 2.
Tools required: Screwdriver, Tachometer (ECHO P/N 99051130017).
NOTE
Every unit is run at the factory and the carburetor is set in compli-
ance with emission regulations. This carburetor does not have
acceleration and high speed adjustment needles.
WARNING DANGER
The cutting attachment should not move at idle. If attachment
moves, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1. Check idle speed using a tachometer, and reset if necessary. Turn
idle screw (A) clockwise to increase idle speed; counter clockwise to
decrease idle speed.
A

Other manuals for Echo SRM-210

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo SRM-210 and is the answer not in the manual?

Echo SRM-210 Specifications

General IconGeneral
BrandEcho
ModelSRM-210
CategoryTrimmer
LanguageEnglish

Related product manuals