EasyManuals Logo
Home>Echo>Trimmer>SRM-261T

Echo SRM-261T User Manual

Echo SRM-261T
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
15
STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke, and do not hold throttle trigger fully depressed.
WARNING DANGER
The attachment should not move at idle, otherwise serious
personal injury may result.
NOTE
If attachment moves, readjust carburetor according to “Carburetor
Adjustment” instructions in this manual or see your ECHO Dealer.
1. Stop Switch
Move stop switch button (A) forward away from the STOP
position.
2. Primer
Pump primer bulb (C) until fuel is visible in the "Clear" fuel return
line.
3. Recoil Starter
Lay the unit on a flat area and keep movable attachment parts clear
of all obstacles. Rapidly pull the recoil starter handle (D) until the
engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
STOPPING ENGINE
1. Release Throttle.
Allow engine to return to idle before shutting off engine.
2. Stop Switch
Move stop switch button (A) backward to STOP position.
WARNING DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using trimmer
again.
C
A
A

Other manuals for Echo SRM-261T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo SRM-261T and is the answer not in the manual?

Echo SRM-261T Specifications

General IconGeneral
BrandEcho
ModelSRM-261T
CategoryTrimmer
LanguageEnglish

Related product manuals