EasyManua.ls Logo

Echo SRM-260 - 10-05

Echo SRM-260 - 10-05
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation. Failure to do so could result in serous injury.
Grass Trimmer/Brush Cutter
Operator's Manual
MODELS SRM-260
SRM-260S
X7532091403
X753000613
10/05
Question and Answer IconNeed help?

Do you have a question about the Echo SRM-260 - 10-05 and is the answer not in the manual?

Echo SRM-260 - 10-05 Specifications

General IconGeneral
BrandEcho
ModelSRM-260 - 10-05
CategoryTrimmer
LanguageEnglish

Summary

SAFETY GUIDELINES

Safety Symbols and Key Words

Explains safety alerts, symbols, and key words used in the manual and on the product.

OPERATOR PHYSICAL CONDITION

Protective Gear Requirements

Specifies requirements for eye, hand, and hearing protection during operation.

OPERATOR SAFETY PRECAUTIONS

Preventing Repetitive Stress Injuries (RSI)

Explains RSI/CTS risks and provides methods to reduce them.

EQUIPMENT AND EMISSIONS

Approved Attachments and Unit Checks

Stresses using only ECHO approved attachments and performing pre-operation checks.

ASSEMBLY INSTRUCTIONS (Continued)

Nylon Line Head Installation Steps

Step-by-step guide to install the nylon trimmer head onto the drive shaft.

OPERATION GUIDE

Using Cutting Blades Safely

Details preparation, requirements, and safety for using cutting blades.

Blade Selection Criteria

Guides on selecting the appropriate blade based on material type and size.

OPERATION GUIDE (Continued)

Blade Types and Their Uses

Describes various blades (plastic/nylon, 8-tooth, 80-tooth, 22-tooth) and their uses.

FUEL AND MIXING

Fuel and Oil Specifications

Covers gasoline and oil specifications, safe fuel handling, and mixing instructions.

Safe Fuel Handling Practices

Covers gasoline and oil specifications, safe fuel handling, and mixing instructions.

Fuel Mixing Procedure

Covers gasoline and oil specifications, safe fuel handling, and mixing instructions.

STARTING A COLD ENGINE

Cold Start Sequence and Steps

Details the sequence of actions for starting a cold engine, including switch, choke, primer, starter.

ENGINE STARTING AND STOPPING

Starting a Warm Engine Procedure

Outlines the procedure for starting a warm engine, noting differences from cold start.

Proper Engine Stopping Technique

Explains how to properly shut off the engine using the stop switch.

MAINTENANCE OVERVIEW

Scheduled Maintenance Intervals

Lists recommended maintenance intervals and procedures for various components.

MAINTENANCE PROCEDURES

MAINTENANCE PROCEDURES (Continued)

TROUBLESHOOTING ENGINE PROBLEMS

Engine Start and Run Issues Chart

A chart addressing common engine problems, their causes, and remedies.

STORAGE GUIDELINES

Related product manuals