Echo SRM-260 - 12-06

WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation. Failure to do so could result in serous injury.
Grass Trimmer/Brush Cutter
Operator's Manual
MODELS SRM-260
SRM-260S
X7532098400
X753002750
12/06

Echo SRM-260 - 12-06 Specifications

General

Brand	Echo
Model	SRM-260 - 12-06
Category	Trimmer
Language	English

Summary

Introduction

The Operators Manual

Guide to operating the grass trimmer/brush cutter, including specifications and assembly.

The Safety Manual

Guide to hazards and safety measures for using grass trimmers and brush cutters.

Safety

Manual Safety Symbols and Important Information

Explanation of safety alerts, symbols, and keywords used in the manual.

International Symbols

Explanation of standardized symbols used on the equipment and in the manual.

Personal Condition and Safety Equipment

Guidance on operator's physical state and required safety gear.

Physical Condition and Protective Gear

Personal Protective Equipment (PPE)

Details on required safety gear such as eye, hand, and hearing protection.

Environmental and Health Considerations

Advice on operating in hot weather and managing health risks from vibration.

Repetitive Stress Injury Prevention

RSICTS Risk Reduction Steps

Specific actions to minimize the risk of repetitive stress injuries during operation.

Safe Operation Practices

Work Area, Grip, Stance, and Surfaces

Best practices for maintaining a safe work area, firm grip, and stable stance.

Equipment and Emission Control

Approved Attachments and System Standards

Guidance on using ECHO-approved attachments and emission compliance.

Product Description and Decals

Safety Decals and Unit Identification

Locating and understanding safety decals and identifying the unit's parts.

Component Identification

Power Head, Controls, and Systems

Identification of engine, fuel, ignition, and control system components.

Drive Shaft and Cutting Components

Identification of the drive shaft, gear housing, and cutting head assemblies.

Assembly Instructions

Plastic Shield Installation

Instructions for correctly installing the plastic debris shield before operation.

Head and Handle Installation

Nylon Line Head Installation

Detailed steps for installing and loading the nylon trimmer line head.

Front Handle Installation

Guidance on positioning and securing the front handle for comfortable operation.

Operation with Blades

Blade Conversion Kit and Blade Selection

Requirements for blade conversion kits and selecting the appropriate blade type.

Blade Types and Harness Usage

Specific Blade Applications and Harness Recommendation

Details on using various blades and the importance of the shoulder/waist harness.

Fuel Requirements and Handling

Approved Fuels, Oils, and Safety Precautions

Guidance on correct fuel/oil mix, approved types, and fuel handling safety.

Fuel Mixing and Storage

50:1 Mix Ratio and Fuel Storage Guidelines

Details on the 50:1 fuel mix ratio and best practices for storing fuel.

Starting Cold Engine

Cold Start Procedure Steps

Detailed procedure for safely starting a cold engine, including choke and purge use.

Engine Starting and Stopping

Warm Start and Shutdown Procedures

Steps for starting a warm engine and the correct method for stopping the engine.

Maintenance Schedule and Skill Levels

Maintenance Intervals and Task Difficulty

Schedule of maintenance tasks based on time/usage and their difficulty ratings.

Air and Fuel Filter Maintenance

Filter Cleaning and Replacement Procedures

Detailed steps for maintaining the air filter and fuel filter for optimal performance.

Spark Plug and Cooling System Care

Spark Plug Maintenance and Cooling System Cleaning

Steps for spark plug service and ensuring proper engine cooling.

Exhaust System Maintenance

Spark Arrestor Screen Cleaning

Instructions for cleaning the spark arrestor screen to maintain performance.

Exhaust Port and Carburetor Adjustment

Cylinder Exhaust Port Cleaning and Carburetor Tuning

Steps for cleaning the exhaust port and adjusting the carburetor for performance.

Lubrication Procedures

Gear Housing and Drive Shaft Lubrication

Specific steps for lubricating the gear housing and drive shaft assembly.

Nylon Line Replacement

ECHOMATIC Pro Trimmer Head Line Loading

Detailed steps for loading new trimmer line into the ECHOMATIC Pro trimmer head.

Sharpening Metal Blades

Blade Inspection and Sharpening Technique

Proper methods for inspecting blades for damage and sharpening them correctly.

Troubleshooting Engine Problems

Common Engine Starting and Running Issues

Troubleshooting steps for problems like hard starting, stalling, or poor acceleration.

Long Term Storage

Storage Maintenance and Preparation

Steps for draining fuel, protecting the engine, and storing the unit safely.

Specifications

Model SRM-260 SRM-260 S Technical Data

Detailed specifications including dimensions, weight, engine, and performance metrics.

Servicing, Parts, and Support

Parts, Warranty, and Contact Information

Details on ordering parts, registering the warranty, and contacting ECHO support.