EasyManua.ls Logo

Echo SRM-260 - 12-00 User Manual

Echo SRM-260 - 12-00
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Grass Trimmer/Brush Cutter
Operator's Manual
MODELS, SRM - 260
SRM - 260S
Serial Number 04001001 - 04999999
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation. Failure to do so could result in serous injury.
X7502096100
X750002010
12/00
Question and Answer IconNeed help?

Do you have a question about the Echo SRM-260 - 12-00 and is the answer not in the manual?

Echo SRM-260 - 12-00 Specifications

General IconGeneral
Engine Displacement25.4 cc
Engine Type2-stroke
Shaft TypeStraight
Fuel Capacity0.5 L
Line Diameter2.4 mm
Fuel Tank Capacity16.9 fl. oz (500 ml)
Warranty2 years

Summary

Safety Information

Manual Safety Symbols and Important Information

Explains safety symbols, keywords, and their meanings for safe operation.

Equipment

Use ECHO approved attachments

Emphasizes using only ECHO approved attachments to prevent serious injury.

Fuel

Fuel Requirements

Specifies required gasoline octane and two-stroke oil type.

Mixing Instructions

Provides step-by-step guide for mixing fuel and oil.

Handling Fuel

Safety warnings for mixing, storing, and handling fuel.

Personal Condition and Safety Equipment

Physical Condition

Advises operating the unit only when physically and mentally well.

Eye Protection

Specifies wearing eye protection meeting ANSI Z87.1 or CE requirements.

Hand Protection

Recommends wearing non-slip gloves for better grip and vibration reduction.

Hearing Protection

Recommends wearing hearing protection whenever the unit is used.

Proper Clothing

Details recommended clothing for safe operation, avoiding loose items.

Safe Operation

Operation

Covers using proper clothing, equipment, and safe practices during operation.

Specifications

Assembly

Plastic Shield Installation

Steps for installing the plastic shield for nylon line operation.

Pre-Operation

Operation with Blades

Covers preparation and safety for using blades.

Preparing the Trimmer/Brush Cutter for Blade Use

Details required configuration, shield, and harness for blade use.

Choosing the Correct Blade

Advises matching the blade to the material type and size for safety.

Storage

Equipment Check and Operation Area

Equipment Check

Lists pre-operation checks for unit integrity and safety.

Determine Operation Area

Advises inspecting the area for hazards and clearing spectators.

Operation

Starting Cold Engine

Provides step-by-step instructions for starting a cold engine.

Starting Warm Engine

Details the procedure for starting a warm engine.

Stopping Engine

Maintenance

Maintenance Intervals

Exhaust System Maintenance

Lubrication

Sharpening Metal Blades

Troubleshooting

Storage

Long Term Storage (over 30 days)

Outlines protective storage maintenance for periods over 30 days.

Related product manuals