EasyManuals Logo

Echo SRM-4000 User Manual

Echo SRM-4000
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
57
SRM-4000/5000
E
N
G
L
I
S
H
D
E
U
T
S
C
H
I
T
A
L
I
A
N
O
CHECKING THE BLADE
(U-handle Version)
Use only the blade designated for this model by the
manufacturer.
When a crack is noticed on the blade, do not use it but
replace with a new one.
Ensure that the blade is correctly fitted in accordance with
the instructions.
FUNZIONE DEL DENTE
(Versione con impugnatura ad U)
Usare solo la lama indicata per questo modello dal
fabbricante.
Non usare lame incrinate, sostituire con lame nuove.
Verificare che la lama sia correttamente montata in
conformità alle istruzioni.
NACHPÜFEN DER MESSER
(U-Griff Version)
Nur die vom Hersteller für das Modell spezifizierte Klinge
verwenden.
Eine Klinge, an der ein Riß bemerkt wird, ist sofort aus
dem Verkehr zu ziehen und durch eine neue Klinge zu
ersetzen.
Sicherstellen, daß das Messer den Anweisungen
entsprechend richtig befestigt ist.
30°
When the cutting blade becomes dull due to wear reverse
it for further use.
When chip or bend occurs on the blade, vibration will
increase.
Replace with a new one.
When filing the blade file 3 cutting edges evenly using a
flat file as shown in the illustration.
Otherwise, the balance will be lost and vibration will
increase.
Sind die Schneidkanten des 3-Zahnmessers stumpf,
dann drehen Sie das Messer um und benützen die
scharfe Gegenseite.
Ist das Schneidmesser aus irgend einem Grund verformt
bzw durch einen Riss defekt, dann muss es dringend
ausgewechselt werden.
Schärfen Sie das 3-Zahnmesser mit einer Flachfeile an
jeder Schneide gleichmässig.
Ungleichmässiges Schärfen verursacht erhoete
Vibrationen und führt zu erhoehtem Verschleiss.
Quando la lama perde affilatura a causa dell’usura,
girarla per poterla usare ancora.
Quando la lama viene danneggiata o piegata, il livello
di vibrazioni è destinato ad aument are.
Sostituirla con una nuova.
Quando affilate la lama, affilare tre denti con l’apposita
lima piatta come mostrato nell’illustrazione.
Altrimenti, si perderà in bilanciamento e ne deriverà un
maggior numero di vibrazioni.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo SRM-4000 and is the answer not in the manual?

Echo SRM-4000 Specifications

General IconGeneral
BrandEcho
ModelSRM-4000
CategoryTrimmer
LanguageEnglish

Related product manuals