7WHEELED TRIMMER
ENGLISH
OPERATION
4.4 SELF-PROPELLED OPERATION
The Wheeled Trimmer can be used in either push or self-propelled mode. Check engine oil level before starting (see
Engine Owners Manual).
1. Pull back on the self-propelled bail located in front of the handlebar to start moving forward.
2. Adjust the trimmer speed with the shift lever. Position 1 is the slowest and position 3 is the quickest. The ground
speed ranges from 1, 1.5 and 2 mph.
3. Operate trimmer safely and as intended.
4. To stop the trimmer release the self-propelled bail.
5. To stop the engine, release the trimmer bail.
To Next Page
Loading...
