Echogear EGMF2 - Step 2 B Install the Wall Plate (For Concrete); Align the Template; Drill Holes

12
(For CONCRETE)STEP 2B In stall the Wall Plate
REMEMBER THE LAST TIME
YOU “WINGED IT”?
002862.eps
IMPORTANT: Never drill into the mortar
between blocks.
10 mm
(3/8 in.)
7.6 cm (3 in.)
Bit
"come on ...
level with me"
05
2X
Align the Template Drill Holes
STEP 2B.1 STEP 2B.2