EchoLife ET655 - Page 34

EchoLife ET655 IP Phone User Manual
5 Using the ET655
28
Step 1 Pick up the handset; press , or enable the headset by pressing
HEADSET
to establish a conversation.
Step 2 Press
TRANSFER
for a dial tone.
Step 3 Dial the number of a third party and press
SEND
to transfer the active call.
Consultation transfer:
To transfer calls by one account, the other one must be unoccupied.
Step 1 Pick up the handset; press , or enable the headset by pressing
HEADSET
to establish a conversation.
Step 2 Press another available LINE key for a dial tone.
Step 3 Dial the number of a third party and press
SEND
.
Step 4 If the call is established, press
TRANSFER
and select the previous LINE key,
the transfer is finished.
 If the call is not established, press the previous LINE key to return to the
previous conversation.
 If the call is canceled and terminated before the call of the third party is
connected, the ET655 rings, indicating that a call is held.
To transfer calls across different SIP domains, the VoIP service providers
must support this feature.