EchoLife ET655 - 6 Restoring Factory Default Settings

EchoLife ET655 IP Phone User Manual
6 Restoring Factory Default Settings
32
6 Restoring Factory Default Settings
Restoring the factory default settings can clear all configuration information
about the ET655. Back up or print all the settings before you restore factory
default settings. Huawei is not responsible for parameter loss or failier to
connect to your VoIP service provider due to the operation of restoring the
factory default settings.
To restore the factory default settings, do as follows:
Step 1 Press
MENU
to access the keypad configuration UI menu, and select
Config
.
Press
MENU
to access submenus, and select
Factory Reset
. For details, see
Table 4-1.
Step 2 Type the MAC address that is printed on the bottom of the sticker by using the
following rules:

0–9: 0–9

A: 22 (Press the 2 key twice and A is displayed on the LCD.)

B: 222

C: 2222

D: 33 (Press the 3 key twice and D is displayed on the LCD.)

E: 333

F: 3333
For example, if the MAC address is 0018820E3956, type 00188203333956. The LCD
displays the entered MAC address 0018820E3956.
If digits are duplicate in the MAC address, for example, 22, you need to
press RIGHT to move the cursor or wait for four seconds for typing
another 2.
Step 3 Press the
OK
soft key.