16
Installation Guide
16
tel - 1-866-766-2267
email - gmsupport@echomaster.com
Illustrations are typical and may not match exact vehicle detail
FCTP-GM2403
Trailering Camera System
PCAM-12FF Installation: Camera Installation
Step 1:
Find the desired mounting location.
Step 2:
Remove the adhesive backing from the mounting base of
the camera.
Step 3:
Clean the surface and secure the camera to the grill in the
desired mounting location. At this time, install the included
mounting screws.
PLEASE NOTE
The recommended mounting location is
centered on the grill and just below the emblem.
NOTE
The installation of the mounting screws is
an optional step and is at the discretion of
the installer.
NOTE
To Next Page
Loading...
