To Next PageTo Next Page
Need help?Do you have a question about the EchoPilot FLS 2D and is the answer not in the manual?
General| Type | Forward Looking Sonar |
|---|---|
| Operating Frequency | 200 kHz |
| Housing Material | Bronze |
| Weight | 2.5 kg |
| Power Supply | 12V DC |
| Maximum Range | 100 meters (328 feet) |
| Operating Temperature | -10°C to +50°C (14°F to 122°F) |
Instructions regarding the handling of transducer cables to maintain performance.
Instructions for handling the transducer plug to avoid performance reduction.
Procedure for powering the FLS 2D unit on.
Description of the keypad functions and their operations.
Explanation of the different operating modes of the FLS 2D.
Explanation of the automatic range selection feature.
Details on the 15-second history plot displayed by the FLS 2D.
Configuration and function of the shallow water alarm.
How to adjust the sonar signal gain for optimal display.
Using the noise filter to reduce display clutter.
Adjusting the LCD backlight brightness.
Enabling or disabling the depth history feature.
Enabling or disabling the audible key bleep.
Selecting between different colour schemes for the display.
Choosing between strength-encoded or mono colour for echoes.
Setting the displayed boat length.
Selecting the boat type from available options.
Adjusting the bow offset for accurate readings relative to the vessel.
Choosing the operating language for the FLS 2D unit.
Setting the display units for depth measurement (Metres or Feet).
Configuring the depth offset for accurate depth readings.
Information on operating a repeater display unit with the FLS 2D.
How to enter and use the FLS 2D demonstration mode.
Visual representation of the FLS 2D system wiring connections.
Guidance on managing interference from other sounders.
Recommendations for cleaning and maintaining the FLS 2D unit and transducer.
Identification of wire colours for power supply connections.
Guidance on flush and bracket mounting the FLS 2D display.
Critical instructions regarding the transducer cable and its connections.
Detailed steps for installing the transducer skin fitting through the hull.
Information on transducer safety features and hull fitting considerations.
Specific guidance for installing the transducer on sailing vessels.
Key considerations for optimal transducer placement and installation.
Specific guidance for installing the transducer on motor vessels.
Explanation of the sonar beam shape and coverage.
Factors determining the maximum forward view distance.
Understanding the digital depth readout and its limitations.
Advice on practicing and interpreting sonar readings.
Considerations for using the FLS 2D while the vessel is underway.
Troubleshooting issues when the FLS 2D display does not power on.
Diagnosing problems when the FLS 2D display remains blank after powering on.
Addressing scenarios with no seabed signal and a flashing transmitter LED.
Resolving issues related to unclear seabed images or excessive noise on the display.
