Name-Based Recording
6
Setting Up a DISH Pass
SETTING UP A DISH PASS
DISH Pass lets you create an automated DVR timer for a program title, actor’s name, or
keyword. After you set up a DISH Pass, the receiver will continually search based on your
request.
1 Press Menu-7 to open the Daily Schedule. You can press the DVR button twice to open
the Daily Schedule, as well.
2 Select DISH Pass.
3 Select the Search Method:
• Title - Search for programs by title.
• Info - Search for programs whose descriptions and titles contain key words.
• Exact - Select this option if you know the exact title of the program.
4 Enter your search criteria. You can use the keyboard shown on the screen or you can use
the Number pad on the remote control.
5 Select Create Timer. When the receiver has completed your search, the Timer Schedule
will display the results.
6 Select Set Priority if you would like to change the priority of your DISH Pass.
7 Select Options if you’d like to change any of the following:
• Protect Event - Prevents your programs from being erased.
• Set Channel - Select a specific channel.
• Start Early.
• End Late.
8 Select Done.
DELETING A TIMER
Complete the following to delete a timer:
1 Press Menu-7 to open the Daily Schedule screen.
2 Select Timers to display the Timers List.
3 Select Edit List.
4 Select the timer or timers you want to delete.
Note: Select All if you want to delete all of your timers.
5 Select Delete. The timer is deleted.
To Next Page
Loading...
