207
11. TECHNICAL CHARACTERISTICS
11. CARACTERÍSTICAS TÉCNICAS
11. CARACTÉRISTIQUES TECHNIQUES
11. TECHNISCHE DATEN
INPUT SECTION
Input impedance
10kΩ electronically balanced
Maximum input level +20dBV
CMRR >50dB (30Hz ÷ 20kHz)
Input connector XLR3 female
OUTPUT SECTION
Output impedance
<50Ω electronically balanced
Maximum output level
+14dBV into 600Ω or greater
Output gain ±15dB variable in 0,2 dB steps
Output connector XLR3 male
CROSSOVER FILTERS
Slopes 6, 12, 18, 24 or 48dB/octave (Filter type dependant)
Type Linkwitz-Riley, Butterworth or Bessel
DELAYS
Delay step 21µs
Maximum Delay time 635ms
EQ
Maximum number of EQ filters 60 (Filter type dependant)
EQ type Parametric, Bell or Shelving
EQ gain ±15dB, variable in 0,5 steps
EQ bandwidth 0,05 to 3 octaves, variable in 0,05 steps
EQ frequency 15Hz ÷ 16kHz
GENERAL PERFORMANCE
Frequency response 15Hz ÷ 20kHz ±0,25dB
15Hz ÷ 40kHz ±3dB
Channel separation >80dB, 30Hz ÷ 20kHz
Distortion (THD) <0,007%, 20Hz ÷ 20kHz @ +10dBV output
Dynamic range >100dB, 20Hz ÷ 20kHz
GENERAL
Mains 90÷264VAC 50/60Hz
Power consumption 25VA
Dimensions WxHXD 481x44x223mm
Weight 2,5kg
To Next Page