24
10. TECHNICAL CHARACTERISTICS
INPUT SECTION
Input impedance
8k electronically balanced
CMRR >55dB (30Hz ÷ 20kHz)
Input connector XLR3 female
OUTPUT SECTION
Output impedance
150 electronically balanced
Output connector XLR3 male
SAMPLE RATE
48kHz
FREQUENCY RESPONSE
<10Hz ~ 20kHz
DYNAMIC RANGE
>102dB
THD
< 0.0028% (1kHz, 1Vrms)
CROSSTALK
>95dB, 30Hz ÷ 20kHz
CROSSOVER FILTERS
Slopes 12, 18, 24 or 48dB/octave (Filter type dependant)
Type Linkwitz-Riley, Butterworth or Bessel
DELAYS
Input delay / step 682.52ms / 21µs
Output delay / step 21.31ms / 21µs
EQ
Input EQ quantity 6 per channel
Output EQ quantity 4 per channel
EQ type Parametric, L-Shelf 6dB, L-Shelf 12dB, HShelf 6dB, H-Shelf 12dB
EQ gain -30dB ~,15dB step 0.1dB
EQ bandwidth 0.016 to 4 octaves
EQ frequency 19.7Hz ÷ 21.9kHz
COMPRESSOR
Threshold -20 +10 dBV
Attack time 0.5 ~ 50ms
Release time 10 ~ 1000ms
Ratio 1:1.2 to 1:∞
GENERAL
Mains 90÷264VAC 50/60Hz
Power consumption 25VA
Dimensions WxHXD 482.6x44x223mm
Weight 3kg
ECLER Laboratorio de electro-acústica S.A.
Motors 166-168, 08038 Barcelona, Spain
INTERNET http://www.ecler.com E-mail: info@ecler.es
50.0163.01.01
To Previous Page
Loading...