Need help?Do you have a question about the Ecler DPA600 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Output Power per Channel @ 4 Ohms | 300 W |
| Frequency Response | 20 Hz - 20 kHz |
| THD (Total Harmonic Distortion) | < 0.05% |
| Signal-to-Noise Ratio | > 100 dB |
| Input Impedance | 20 kΩ |
| Damping Factor | > 200 |
| Total Output Power | 600 W |
| Output Power per Channel @ 70V | Not applicable |
| Output Power per Channel @ 100V | Not applicable |
| Cooling | Fan |
Safety guidelines for amplifier installation and operation.
Proper placement and airflow management for optimal performance.
Guidelines for connecting to the main power supply.
How to connect audio sources to the amplifier's inputs.
Details on the switchable filter for low frequencies to protect speakers.
Explanation of ANTICLIP circuitry for distortion prevention.
Instructions for connecting loudspeakers to the amplifier outputs.
Procedure for safely powering on the amplifier and correct sequence.
How to use front panel controls for input level adjustment.
Explanation of front panel LEDs for status and protection.
Visual representations of internal components and connections.
Schematic overview of the amplifier's internal signal flow and circuitry.
To Next Page
