Ecler HAK360 - 6 Características Técnicas; 6 Caractéristiques Techniques; 6 Technische Daten; 6 Technical Characteristics

40
6. TECHNICAL CHARACTERISTICS 6. CARACTERÍSTICAS TÉCNICAS
6. CARACTÉRISTIQUES TECHNIQUES 6. TECHNISCHE DATEN
Inputs Sensitivity nom/Impedance PHONO -45dBV/50k
LINE -10dBV/50k
SESSION 0dBV/20k
MICRO (BAL) -50-30dBV/1.5k
INSERT 0dBv/100k
MIX 0dBV/20k
Outputs Level/Minimum Load OUT 1 (BAL) 0(+6)*dBV 600 / 1(2)V
OUT 2 +6(0)*dBV 1k / 2(1)V
INSERT (MIC) 0dBV/1k
EFFECT 0dBV/1k
REC 0dBV/10k
HEADPHONES 230mW/400
Maximum input level (full gain) PHONO -28dBV
LINE +8dBV
MICRO -10dBV
Input tone adjust MICRO ±10dB @ 100Hz
±10dB @ 10kHz
Frequency Response PHONO RIAA  0.5dB
LINE 10Hz30kHz -1dB
MICRO 10Hz30kHz -1dB
THD + N PHONO <0.09%
LINE <0.05%
MICRO <0.15%
CMRR MICRO >75dB 1kHz
Signal Noise Ratio PHONO >85dBV
LINE >100dBV
MICRO >75dBV
Tone control BASS -30/+10dB
MID -25/+10dB
TREBLE -30/+10dB
Kill Filters HIGH 6.5kHz
(cut frequency at -6dB) LOW 200Hz
Slope 12dB/oct in all the cases MID 6.5kHz & 200Hz
Mains VOLTAGE 90-264 VAC
FREQUENCY 47-63 Hz
Power consumption 22 VA
Dimensions 265x360x80mm
Weight 4.3kg
* Internally selectable