Ecler NUO2 - TECHNICAL CHARACTERISTICS

author: J. Colomines date: 041015 project: M09-04 product: NUO2
approved:
num:
53.0064 version: 01.00
A.S.
3,3 kg
30VA
370x160mm
80mm
90-264VAC 47-63Hz
+10 / -30dB
+10 / -25dB
+10 / -30dB
HIGH
>85dB
>90dB
±15dB
>70dB @ 1kHz
>95dB
<0.07%
<0.1%
<0.15%
10Hz÷30kHz -1dB
10Hz÷35kHz -1dB
RIAA ±0.5dB
0dBV/2.2kΩ 1V *(+6dB 2V)
0dBV/600Ω 1V *(+6dB 2V)
200mW/200 Ω THD 1%
0dBV/10kΩ
PHONO
MICRO
H-LINE & L-LINE
PHONO
MICRO
H-LINE & L-LINE
Gain control
Tone control input 1&2
Signal Noise Ratio H-LINE & L-LINE
Mains
Power consumption
MID
BASS
INPUT 1&2
PHONO
MICRO
0dBV/50kΩ
MICRO
H-LINE
-10dBV/50kΩL-LINE
title:
TECHNICAL CHARACTERISTICS
(*) Internally selectable
Weight
Inputs Sensitivity nom/Impedance
CMRR
Depth
PanelDimensions
TREBLE
TREBLE
5,5kHz
Frequency Respons
e
THD+N
200 Hz
(slope 12dB/oct.) MID 200Hz÷5,5kHz
Kill Filter, cut frequency at -6dB LOW
FX RETURN 0dBV/>15kΩ
PHONO
MICRO
-40dBV/50kΩ
-50dBV/>1kΩ
Outputs Level/Minimum Load
HEADPHONES
OUT 1 (BAL)
OUT 2
REC
FX SEND 0dBV/10kΩ
INPUT 3 ± 20dB
Tone control input 3 BASS ±15dB
±15dB
E
C
LER