Ecler TRAIL103 - Technical Specifications and Package Contents; Detailed Technical Specifications; Package Contents List

14
TECHNICAL SPECIFICATIONS
TRAIL103
System
Effective frequency range
1
115 Hz-20 kHz
Coverage angle
2
180°x180° (HxV)
Power handling
15 W RMS / 60 W Peak
Sensitivity
3
83 dB (1W/1m)
Maximum SPL
4
95 dB continuous / 101 dB peak
Power options
Lo-Z: 4Ω; Hi-Z: 15/30 W @ 100V
Recommended amplifier power
30 W RMS
Transducers
Ways
1
Driver
3" woofer
Nominal impedance
4Ω
Physical
Connection type
Clamp terminals + Euroblock terminals
Installation options
Ceiling light rails, surface mount, truss mount
Mounting system
Cabinet
Rail fixing system
4 wire 3 circuit track system
Compatible rail systems
Global Track Pro or compatibles
Support arm
Swivel (pan and tilt)
Included accessories
Mounting accessories
Finished colour
White (RAL 9003) or black (RAL 9005)
Dimensions (ØxD) without arm
96x110mm / 3.78"x4.33"
Weight
1.0 kg / 2.2 lb
1
10dB below the sound pressure level at specified sensitivity
2
6dB below the sound pressure level than that at the direction of maximum level, Max. angle between 1 kHz and 4 kHz.
3
Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz.
4
Calculated from sensitivity and power handling specifications, exclusive of power compression
PACKAGE CONTENTS
• TRAIL103
• Lighting rail mount accessory + speaker box with clamp-on connectors (installed
on speaker by default)
• Surface mount accessory (2 pieces: base + plastic cover)
• Accessory for mounting on threaded rod or truss (2 pieces: aluminum plate +
toothed washer M10)
• Rear speaker cover
• 3C Euroblock connector P=5.08
• 5.1x20 screw for safety cable anchorage (not included)
• Quick User Guide
• Warranty Card