The Ecler eAMBIT103 is a surface-mount loudspeaker designed for sound reproduction in various commercial and public environments. It is part of the AMBIT range, which focuses on discreet design, versatility, and high-quality audio performance for background music and announcements.
Function Description:
The eAMBIT103 functions as a two-way loudspeaker, capable of operating at both high impedance (100V line) and low impedance (8Ω). This dual-mode capability makes it highly adaptable for different installation scenarios, from small rooms to large installations requiring long cable runs. The loudspeaker is specifically designed to blend into its surroundings, with a unique shape that allows for flush corner mounting, making it appear smaller than its actual size. It is suitable for a wide range of applications, including stores, mall centers, schools, conference halls, hotels, industries, offices, museums, meeting rooms, hospitals, and games areas.
Important Technical Specifications:
-
System:
- Effective frequency range¹: 150Hz - 20kHz (¹3dB below the sound pressure level at specified sensitivity)
- Coverage angle²: 207°x207° (HxV) (²6dB below the sound pressure level than that at the direction of maximum level, Max. angle between 1 kHz and 4 kHz)
- Power handling: 25 W RMS / 100 W Peak
- Sensitivity³: 87 dB (1W/1m) (³Measured on-axis, far field and referenced to 1 meter by inverse square law. Average from 100 Hz to 10 kHz)
- Maximum SPL⁴: 101 dB continuous / 107 dB Peak (⁴Calculated from sensitivity and power handling specifications, exclusive of power compression)
- Power options (70/100V): 15W / 7.5W / 5W / 2.5W / 8Ω
- Recommended amplifier power: 50 W RMS
-
Transducers:
- Ways: 2
- Low frequency driver: 3.5" woofer
- High frequency driver: 0.5" tweeter
- Nominal impedance: 8Ω
-
Physical:
- Connection type: Spring-loaded input terminals
- Environmental: IP54 rated
- Mounting system: Cabinet
- Finished colour: White (RAL 9016) or black (RAL 9005)
- Dimensions (WxHxD) (Without accessories): 120 x 120 x 118 mm / 4.72 x 4.72 x 4.65 in.
- Weight: 1.275 kg / 2.81 lb
Usage Features:
- Configurable Operation: The eAMBIT103 features a 5-position switch on the back, allowing selection between high impedance (100V line) and low impedance (8Ω) operation.
- 100V Line Operation: Offers four power handling levels (15W, 7.5W, 5W, 2.5W) for 70V/100V lines, enabling flexible sound intensity adjustment across different zones. This system minimizes power loss over long cable runs, which is beneficial for large installations.
- Low Impedance Operation: Provides a maximum power capacity of 25W RMS at 8Ω. When connecting multiple low-impedance speakers, it is crucial to consider the amplifier's limitations and avoid impedances lower than 4Ω.
- Discreet Design: The cabinet's unique shape, with a cut-off pyramid rear, allows for flush installation in corners, making the speaker appear smaller and less obtrusive. The adhesive Ecler logo can be repositioned, and the concentric high-frequency driver allows for mounting in any orientation without affecting sound quality or aesthetics.
- Versatile Mounting: The loudspeaker comes with a comprehensive set of accessories for installation, including two brackets, Allen screws for anchoring, miscellaneous screws and rawlplugs for wall mounting, safety runners, and an L-shaped Allen wrench. The rear of the unit has four nuts (60mm diagonal distance) for attaching safety slings or standard brackets. Ecler also offers additional mechanical accessories for grouping multiple AMBIT units.
- Durability: With an IP54 rating, the eAMBIT103 is protected against dust ingress and splashing water, making it suitable for outdoor use, though direct exposure to rain or sunlight should be avoided.
- Sound Quality: Despite its compact dimensions, the eAMBIT103 delivers surprisingly good sound quality, attributed to its special shape that allows for a higher internal volume than might be expected. It achieves a power capacity of 25W RMS and 87dB SPL at 1W 1m.
Maintenance Features:
- Qualified Servicing: All servicing should be performed by qualified personnel. This includes situations where the apparatus has been damaged (e.g., power supply cord/plug damage, liquid spills, objects falling into the unit, exposure to rain/moisture, abnormal operation, or dropping).
- Cleaning: The device should be cleaned only with a dry cloth.
- Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions to ensure proper airflow.
- Power Disconnection: While the POWER switch stops all functions and light indicators, full disconnection from mains is achieved by unplugging the power cord from the input socket, which should always remain readily operable.
- Safety Instructions: Adherence to important safety instructions is crucial for preventing electric shock, fire hazards, and ensuring the longevity of the device. This includes protecting the power cord, using manufacturer-specified attachments, and avoiding use near water or heat sources.
- Environmental Responsibility: The product must not be discarded as unsorted urban waste. It should be taken to the nearest electrical and electronic waste treatment center for proper disposal.
The eAMBIT103 is designed for ease of installation and configuration, providing a flexible and high-performance audio solution for a wide array of professional sound reinforcement applications.
Need help?
To Next Page
General
