6
• The AMBIT packaging contains everything you need to anchor the boxes in the
required position.
• The versatility of these cabinets together with a large program of mechanical
accessories make it possible to install systems by grouping together from two to
as many boxes as are necessary to deal with virtually every need related to the
reproduction of ambient music and announcement broadcasting.
• Reliability and Quality. Above all, AMBIT103 cabinets have a surprisingly good
quality in terms of sound considering their dimensions. This is possible thanks to
their special shape, which enables a higher volume to be achieved than what
could be imagined. A power capacity of 25W RMS and 87dB SPL at 1W 1m is
difficult to equal in enclosures with the same features and price.
5. CONNECTIONS
The AMBIT103 admits operation as high or low impedance. A 5-position switch is
located at the back of the speaker and allows the selection of the operating mode.
The first 4 switch positions are to be used in conjunction with a 100V line. Using a
100V speaker distribution system has various advantages regarding installation
flexibility. First, different types of loudspeakers (different power handling or
impedance) can be used simultaneously as required in different zones. On the other
hand, the 100V line system minimizes power loss due to cable resistance, as usually
long cable runs are required in large installations.
The AMBIT103 has 4 power handling levels for the 100V line. Depending on the
intended use, the speaker output can be attenuated more or less. In the zones where
sound intensity should be low, place the switch in the 2,5W or 5W position. If sound
intensity should be high, place the switch at 7,5 or 15W.
The fifth switch position corresponds to low impedance operation with a maximum
power capacity of 25W RMS. When operating at low impedance you should always
consider the limitations of the power amp when connecting several low-impedance
speakers together. Impedances lower than 4 should be avoided. At low impedance
To Next Page
Loading...
