Eclipse AVN7000 Installation Manual

-
6
-
••
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
••
The cables should be secured with tape or a similar securing method to prevent any obstructions while
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,
or brake pedal, accidents may result.
••
If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire
insulating method around the connection to insulate it. If the connection is not insulated, fire or
accidents may result.
••
Refer to page 7 for details on the wire colors and connection points for interconnecting cables , and
and .
••
Refer to page 8 for details on connection points AA 〜 for the main unit cables and
terminals.
43
2
Tip
G
I
Name and functions of ter
Name and functions of ter
minals
minals
1
2
3
4
5
13P
GPS ANTENNA
14
9
16P
A
6
7
8
10
11
12
F
I
E
D
C
ANTENNA PLUG
MAIN UNIT
1
INTERCONNECTING CABLE
(Speed pulse, parking, reverse,video, etc)
3
INTERCONNECTING CABLE
(Power and speaker connector)
2
B
4P
1P
20P
16P
13
INTERCONNECTING CABLE
(E-lan etc)
4
ANTENA CABLE
5
14
H
G

Eclipse AVN7000 Specifications

General

Brand	Eclipse
Model	AVN7000
Category	Car Navigation system
Language	English