Eclipse CD1200 - How to Operate the AUDIO CONTROL; Switching Audio Control Modes

36
Various Settings
How to operate the AUDIO CONTROL
Various Settings
Switching audio control modes
Various audio control modes may be fine-tuned using this procedure.
Modes will switch in the order shown below each time the button is pressed.
BASS → MID → TREB → BAL→ FAD→ LOUDNESS→ VOL→ BASS www
11
Press the [SELECT] button for less than one second to select the item to be
adjusted.
Mode Function
Rotary Mode (Turn the [VOL] button)
Left Right
BASS Adjusts bass level.
Decrease level Increase level
MID
(MIDDLE)
Adjusts middle level.
Decrease level Increase level
TREB
(TREBLE)
Adjusts treble level.
Decrease level Increase level
FAD
(FADER)
Adjust front/rear speaker balance. Decrease level Increase level
BAL
(BALANCE)
Adjust left/right speaker balance. Decrease level Increase level
LOUDNESS
The loudness control may be turned
on to emphasize low and high
frequencies at low volume levels.
Loudness boosts bass and treble at
low volumes.
Select OFF Select ON