7
BASIC OPERATION
Power On/O
Slide the power switch to the On or O position. You may
also leave the power switch in the On position and use the
Play / Pause button to turn the player on and o.
Note: If the player is powered o by the power switch while
it is still running, all saved settings such as last song played
or date/time settings will be lost.
Note: If the player’s screen freezes, restart it by sliding the
power switch to the O position, then back to the On position.
Charging
When battery power is low, the player will prompt you,
power o, and enter Standby mode automatically. Do not
try to turn on the unit. You must charge again before using.
Charger current specication recommended: 400-500mA.
To charge the player, simply connect it to a powered USB
port, or external AC adapter.
Note: If you choose to use a third party adapter, please ensure
that it is 5V and between 350 and 1000mA, or 1amp.
1. Connect the small end of the supplied USB cable to the
micro-USB port.
2. Connect the large end of the cable to a computer.
A connection icon will appear on the display when you
connect the device to a computer.
To Next Page
Loading...
