8
Note: If you choose to use a third party adapter, please ensure
that it is 5V and between 350 and 1000mA, or 1amp.
Inserting & Removing the microSD Card
Inserting
Ensure that the player is powered off, and disconnected from
the computer. Hold the microSD card face up (side with words
aligned in the opposite direction of the display screen), and
slide the card into the socket on the player, slightly past ush.
When you hear the card click into place, you can access it.
Removing
Ensure that the player is powered off, and push the SD card
just past ush. When you hear the click, release pressure, and
the card will slide out.
Caution: Please ensure that the power is off when you
connect or disconnect your SD card, or damage may occur to
the player or your card.
To Next Page
Loading...
Need help?
General
