Need help?Do you have a question about the Eco ETS Series and is the answer not in the manual?
Details drives for standard and external doors, including models ETS 42 and ETS 73.
Details drives for fire/smoke protection doors, including models ETS 42-R and ETS 64-R.
Information on double-leaf drives for fire and smoke protection doors.
Step-by-step guide for commissioning the drive, including parameter adjustments.
Describes available operating modes like AUTOMATIC, HAND, and OPEN.
Wiring diagram for power supply, master unit, and CAN connection for ETS 73/64-R.
Wiring diagram for the optional fire protection PCB for ETS 64-R.
Wiring diagram for the ETS 42 control unit, including connections for various inputs and outputs.
Description of choosable operating modes: AUTOMATIC, NIGHT, OPEN, HAND, EXIT, and Set up process.
How to change parameters via display and joystick, and joystick movement effects.
Settings for open/close velocity, hold open times, and delay functions.
Settings for opening/closing force, hold open force, opening angle, and linkage types.
Parameters for closing sequence control (Master/Slave) and sluice modes (AUTOMAT, EXIT, NIGHT).
Settings for manual opening support, release angle, and safety element blanking points.
Configuration for door behavior on obstacles, emergency clamp inputs, and step-switch functions.
Settings for unlock modes (Impulse/Permanent), electronic lock feedback, and operation modes.
Causes and solutions for encoder (lost signals, shorts) and motor power errors.
Troubleshooting for damping failures and reference switch detection issues.
Errors related to full-teach or half-teach procedures and parameter changes.
General| Drive System | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Security Features | Rolling Code Technology |
| Motor | DC |
| Warranty | Lifetime Motor Warranty |
| Drive Type | Chain |
To Next Page
