Ecobee EB-STATE6-01 - Step 17 (No C Wire): Attach Backplate to Wall; Step 18 (No C Wire): Apply PEK Wire Labels

Rc
G
Y/ Y1
W/ W 1
C
Rc
G
Y1
Y2
O/ B
PEK
ACC-
ACC+
W 2
W 1
R
H
C
Rc
R
H
G
C
W/ W 1
PEK
Y/ Y1
THERMO STA T CON TROL BOARD
39 40
ST E P 17
Pull the wires through t he hole in the middle of the backplate
and t hen at tach it to t he w all using the d ryw all anchors and
screws p rovided.
TIP: Use a 3/ 16” drill b it to drill a ho le for t he d r y w all anchors.
ST E P 18
Rem ove the Rc, C, and PEK labels from the label sheet and
at tach them to the w ires as show n below :
R/ R
C/ RH ➔ RC
G ➔ C
Y
➔ PEK