Need help?Do you have a question about the Ecobee EMS Si and is the answer not in the manual?
General| Type | Smart Thermostat |
|---|---|
| Connectivity | Wi-Fi |
| Sensors | Room Sensors (optional) |
| Energy Reports | Yes |
| Warranty | 3 years |
| Compatibility | HVAC systems |
| Display | LCD |
| Voice Control | Yes |
| Mobile App | Ecobee App |
| Energy Savings | Up to 23% annually on heating and cooling costs |
| Alerts | Yes |
Provides contact information for technical support via phone and email.
Instructions and precautions for installing the ecobee EMS Si, including safety warnings.
Details on compatible heating and cooling systems, including stage limitations and supported equipment types.
Information on maximum wire lengths and terminal descriptions with electrical ratings for HVAC connections.
Instruction to disconnect power to the HVAC system before proceeding with installation.
Guidance on disconnecting wires from the old thermostat and removing it from the wall.
Instructions for mounting the EMS Si backplate, including ideal location and placement considerations.
Instructions for connecting low-voltage cables to the thermostat and HVAC equipment using wiring diagrams.
Final step to apply power to the HVAC system after wiring is complete.
Settings to configure the connected HVAC devices like furnaces, heat pumps, and air conditioners.
Configuration of temperature and time thresholds for heating and cooling equipment operations.
Setting up maintenance reminders for HVAC service, furnace filters, and UV lamps.
Configuring dry contact inputs (R1, R2) to trigger automated actions based on sensor states.
Steps to connect the EMS Si to a WiFi network and obtain a registration code.
Instructions for creating an online account and registering the EMS Si via the ecobee Web Portal.
Setting up heating and cooling schedules based on occupancy and time of day.
To Next Page
