If Adjust Temperature is chosen as the Type
you will also be presented with the following
options:
Decrease Heat Temp Allows you to program
the number of degrees that the heat set
temperature will be adjusted by once an
input has been activated. A positive number
increases the heat set point and a negative
number decreases the heat set point
Increase Cool Temp Allows you to program
the number of degrees that the cool set
temperature will be adjusted by once an
input has been activated. A positive number
increases the cool set point and a negative
number decreases the cool set point.
In both cases this oset will apply to the
set point temperature at the time of the
activation of the input. As the system
switches between program periods (i.e.,
occupied, unoccupied, etc) this oset will
be maintained. Once the input has been
switched back to the inactive state the set
temperature will revert back to the normal
limits.
Delete this Action Removes the congured
action.
37
To Next Page
Loading...
