Ecobee EMS Si - Using the Weekly Schedule Editor

If your schedule changes, you can quickly and
easily update the EMS Si settings on the device
itself or online through your Web Portal.
Using the Weekly Schedule
Editor
The Weekly Schedule editor lets you to set
specic times, temperatures and furnace fan
settings for each day of the week.
If your system is enabled for auto change-over
mode, the heat and cool set temperatures will
automatically be adjusted to ensure a minimum
dierence.
Adding New Periods
To accommodate for your varying schedule you
can add additional program periods in your
week. For example if you come home for lunch
during the week or want dierent settings for
the weekend, you would simply add one of the
existing periods at the allocated time and day or
create a completely new one.
Disable a Period
To disable a period entirely, select the period’s
Time and then select Disable.
To add a new period:
Display the schedule for a
day and select Add New.
Select Create New Item.
Enter a name for the new
period and select Save.
If your house is in-use
during this period, select
Yes; otherwise select No.
Select Enable.
Select the new time and
press OK.
The new period is added.
54