Ecobee ecobee3 lite - Step 8: Attach Trim Plate; Step 9: Mount Backplate

STEP 8: OPTIONAL
If using the trim plate, align the mounting
holes on the trim plate and backplate and
press them into place together.
STEP 9
Pull the wires through the hole in the
middle of the backplate and then attach
the backplate to the wall using the drywall
anchors and screws provided.
TIP:
Use a 3/16” drill bit to drill a hole for the drywall plugs.
Rc
G
Y/Y1
W/W1
C