STEP 7
Take a picture of the wires connected to your
control board. You may need to reference
this photo later on.
STEP 8
Label only the R, Y or Y1, G and W or W1
wires with the matching labels provided.
If you have more than one wire going into
these terminals, only label those coming
from your thermostat.
Y
W
G
C
R
W
Y
G
R
TIP:
If you have wires connected to both
Rc and Rh terminals at the
control board you may have a two transformer system. Please
contact support to help you with installation: 1.877.932.6233 or
support@ecobee.com.
Wires going to
your A/C
(ignore these)
Wires going to
your thermostat
To Next Page
Loading...
