Ecobee ecobee3 lite - Step 22: Attach Thermostat to Backplate; Step 23: Restore HVAC Power

STEP 22
Gently press your ecobee thermostat into the
backplate until it ‘clicks’ into place.
TIP:
If the thermostat ‘rocks’ or is not flush with the wall, be sure the
excess wires are pushed all the way into the wall.
Rc
G
Y1
C
W/W1
Turn the power to your HVAC system back
on using the master switch or at the circuit
breaker box.
STEP 23
ON
OFF
ON
OFF
OR