2.5 Normal view area
The normal viewing area of the C300S is shown below.
2.6. Normal operation
2.6.1. MODE
Hold MODE and start the display. The display will provide power for the
controller. Hold MODE again can open the backlight. With display on, press
MODE for 1.5 seconds to turn off the power. With the display off, there is no
battery consumption. The leakage current is no more than 2 µA.
The panel will go to sleep when speed is less than 2 km/h for 10
minutes.
2.6.2. CURRENT DISPLAY
That represents the discharging current of the controller currently, each
segment is 2A, six segments is >=12A.
To Next Page
Loading...
