EasyManuals Logo

Ecoflam Linda+ 24 CS CPR User Manual

Ecoflam Linda+ 24 CS CPR
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
respective green L.E.D. D will go off.
Close the gas cock located under the
boiler and turn the electricity supply
switch (located outside the boiler) to
the OFF position.
3. USEFUL INFORMATION
BOILER SHUTDOWN SITUATIONS
The boiler is equipped with safety
devices that intervene in certain
situations and shut it off. Most of these
situations are communicated by means
of the L.E.D.s and at times the user
may be able to remedy them.
SHUTDOWN DUE TO IGNITION
FAILURE
In the event that the automatic ignition
of the burner has failed, the red L.E.D.
G will illuminate. In order to reset the
ignition, the button H must be
pressed and released. If the problem
persists, contact an Authorised Service
Centre.
SHUTDOWN DUE TO OVERHEATING
In the event that the safety limit is
exceeded for the temperature of the
water in the boilers primary exchanger,
the thermostat shuts off the boiler and
the red L.E.D.s I and “G” illuminates.
To remedy this situation, wait a few
minutes to allow the exchanger to cool
down, then press and release the reset
button H.
If this situation occurs frequently,
contact an Authorised Service Centre.
ut linda+ CS/CA GB 6-06-2002 9:28 Pagina 12

Other manuals for Ecoflam Linda+ 24 CS CPR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ecoflam Linda+ 24 CS CPR and is the answer not in the manual?

Ecoflam Linda+ 24 CS CPR Specifications

General IconGeneral
BrandEcoflam
ModelLinda+ 24 CS CPR
CategoryBoiler
LanguageEnglish

Related product manuals