EasyManuals Logo

Ecoflam Linda+ 24 CS CPR User Manual

Ecoflam Linda+ 24 CS CPR
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
contact an Authorised Service Centre.
so that they may check that the
exhaust fumes are being expelled
correctly and that the area is ventilated
properly.
A
NTI-FROST DEVICE
The boiler is fitted with a device which,
in the event that the water temperature
goes below 5°C, the three-way diverter
valve switches to domestic hot water
and the burner turns on at minimum
power until the water in the boiler has
reached a temperature of about 50°C.
This device is only activated when the
boiler is operating perfectly and
- the system pressure is sufficient;
- the boiler is powered electrically;
- gas is being distributed.
4. MAINTENANCE
Schedule an annual maintenance
check-up for the boiler withan
authorized service centre.
Correct maintenance always results in
savings in the cost of running the
system.
5. CHANGE OF GAS TYPE
Our boilers are designed to function
either with Natural Gas (methane) or
LPG gas. If you need to changeover
from one gas to the other, one of our
Authorised Service Centres should be
contacted.
ut linda+ CS/CA GB 6-06-2002 9:28 Pagina 14

Other manuals for Ecoflam Linda+ 24 CS CPR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ecoflam Linda+ 24 CS CPR and is the answer not in the manual?

Ecoflam Linda+ 24 CS CPR Specifications

General IconGeneral
BrandEcoflam
ModelLinda+ 24 CS CPR
CategoryBoiler
LanguageEnglish

Related product manuals