Need help?Do you have a question about the Ecoflam Maior P80 MD and is the answer not in the manual?
Provides a guide and component list for the correct installation of the burner.
Instructions for correctly cleaning and replacing the burner nozzle, including electrode positioning.
Procedure for priming and adjusting the oil pump, including verification steps for optimal operation.
Detailed steps for initiating burner operation and performing initial adjustments for optimal firing.
Explanation of error codes generated by the Landis LMO 44 control system for fault diagnosis.
Guidance on adjusting oil supply by modifying return line pressure for optimal fuel delivery.
Steps for adjusting minimum oil flow rate and air flow for low flame operation.
Details on adjusting air damper positions for high and low flame stages using control cams.
Diagram outlining the different programming levels (Normal, User, Parameters, Configuration) of the regulator.
Explanation of display messages (e.g., '1999', 'tA', 'SP.E') indicating faults or measurement range issues.
To Next Page
General