Need help?Do you have a question about the Ecoflam Multicalor 400.1 and is the answer not in the manual?
Detailed technical parameters for different models.
Graphical representation of burner performance ranges.
Physical dimensions and mounting points of the burner.
Guidelines for wiring and power supply setup.
Instructions for connecting the burner to the gas supply.
Step-by-step process for starting and running the burner on gas.
Procedures for optimizing gas combustion efficiency and parameters.
Detailed sequence of operations for the control box.
Explanation of the air damper motor's function and adjustment.
How to set and adjust the burner's air flow rates.
Guidance on configuring the firing head for optimal performance.
How to set gas and air pressure switches for safety.
Measurement and importance of the flame detector's current.
Correct positioning of ignition electrodes for reliable ignition.
Procedures for cleaning and replacing burner nozzles.
Description of the fuel supply system for light oil.
Steps for priming and adjusting the light oil pump.
Specifications and performance data for the oil pump.
How to start and operate the burner using light oil.
Adjusting the oil flow rate for optimal combustion.
Schematic of the oil hydraulic system components and flow.
Performance curves for Fluidics brand oil nozzles.
Table of output data for Bergonzo oil nozzles.
Recommended periodic maintenance tasks for the burner.
Safety checks before performing maintenance.
Common problems when the burner fails to start or ignite.
Causes and solutions for burner lockouts during operation.
Troubleshooting issues related to flame levels or transitions.
To Next Page
General