Need help?Do you have a question about the Ecoflam MINOR 4 C 1G and is the answer not in the manual?
Detailed technical specifications for MINOR 4 series models, including power and flow rates.
Graphical representation of burner operating ranges and pressure in the combustion chamber.
Diagram and table showing the physical dimensions of the burner unit.
Specifications for maximum lengths of suction lines for two-pipe systems.
Schematic illustration of the burner's hydraulic system.
Procedure for priming and adjusting the fuel pump.
Step-by-step guide for initiating burner operation and initial checks.
Instructions for adjusting the firing head and air for optimal combustion.
Instructions for safely removing the blast tube component.
Guidelines and precautions for replacing the fuel nozzle.
Diagnosing and resolving common startup failures.
Troubleshooting unexpected shutdowns during pre-purge sequence.
Addressing ignition failures and operational stoppages.
Resolving issues where the burner stops after successful ignition.
Schematic of electrical connections and components.
Instructions for electrical connections to be made by the installer.
Steps for performing leak tests on the system.
To Next Page
General