Need help?Do you have a question about the Ecoflam Multicalor 140 and is the answer not in the manual?
Guidance on electrical connections for the burner and its components.
Step-by-step process for burner operation with gas, including pre-purging.
Importance of adjusting combustion and thermal capacity with instruments.
Information on Landis & Staefa control boxes LGB21/LGB22 and LMG21/LMG22.
Guidance on adjusting combustion air for optimal burner performance.
Detailed steps for burner startup and adjustment with light-oil fuel.
Explanation of the RWF 40 regulator's display, keys, and indicator LEDs.
Overview of the different programming levels: Normal, User, Parameters, Configuration.
Procedure for changing the set point value on the regulator.
How to set and activate PID parameters for automatic adaptation.
Explains configuration indications for analog inputs and set points.
Explains error codes indicated by blinking numbers on the display.
Steps for common burner startup and operation faults.
Table listing parameters and their settings for different probe types.
Table detailing configuration parameters (C111, C112, C113) for various probes.
To Next Page
General