Ecoflam Multicalor 45 User Manual

LB 1371
17.06.2004
Multicalor 45
Multicalor 70
Multicalor 100
Multicalor 120
Multicalor 140
PR/MD Gas / AB Gasolio
PR/MD Gas / AB Light oil
A
BRUCIATORI MISTI GAS + GASOLIO
B GAS/LIGHT-OIL DUAL BURNERS

Ecoflam Multicalor 45 Specifications

General

Brand	Ecoflam
Model	Multicalor 45
Category	Burner
Language	English

Summary

Technical Specifications and Dimensions

Fuel Characteristics

Gas and light-oil fuel properties and classifications.

Technical Features

Output, power, and motor details for each Multicalor model.

Installation and Operation - Gas

Electrical Connections

Gas Pipeline Connection

Steps for connecting and testing the gas pipeline.

Burner Operation with Gas

Detailed sequence of burner startup and operation on gas.

Combustion Process Adjustment

Adjusting combustion for performance and safety.

Control Systems and Fault Indication

Landis & Staefa Control Boxes

Pre-purging, ignition, and lockout procedures for control boxes.

LMG21/LMG22 Lockout Error Codes

List of error codes and their possible causes for LMG21/LMG22.

Satronic DMG 972 Fault Messages

Indicates burner faults via flash codes and their meanings.

Troubleshooting and Performance Calculation

Error Diagnosis Table

Table of error messages, flash codes, and possible faults.

Pressure Switch and Airflow Adjustments

Gas Minimum Pressure Switch Adjustment

Air Pressure Switch Adjustment

Combustion Air Damper Motor Adjustment

Burner Capacity Adjustment and Light-Oil Operation

Maximum Burner Capacity Adjustment

Minimum Burner Capacity Adjustment

Light-Oil Fuel Operation

Steps for burner startup and adjustment with light-oil fuel.

Oil Pump System and Circuit

Oil Pump Priming and Adjustment

Procedures for priming and adjusting oil pumps (Suntec, Danfoss).

Burner Head and Gas Disc Adjustments

Firing Head Adjustment

RWF 40 Microprocessor Regulator Operation

RWF 40 Display and Key Description

RWF 40 Programming Levels

RWF 40 Parameter Settings and Configuration

Setting the Set Point

Setting PID Parameters

Procedure for setting or auto-tuning PID parameters.

Ignition and Shutoff Differential Setting

Climatic Compensation Setup

Input Configuration and Fault Display

C111-C112 Input Configuration

Error/Fault Display Indication

Explanation of error codes indicated by blinking numbers on the display.

Maintenance Procedures and Troubleshooting

General Maintenance Procedures

Burner Troubleshooting Guide

Steps to diagnose and resolve common burner startup and operation faults.

Landis RWF 40 Parameter Configuration

Landis RWF 40 Parameters

Landis RWF 40 Configuration Settings

Wiring Diagrams

Multicalor 45-70 Wiring Diagram (Gas/Oil)

Electrical wiring diagram for Multicalor 45-70 models.

Multicalor 45-70 Wiring Diagram (Gas/Oil - Part 2)

Continuation of electrical wiring diagram for Multicalor 45-70 models.

Detailed Parts Lists by Model

Multicalor 45 Parts List

Multicalor 45 Parts List (Continued)

Multicalor 70 & 100 Parts List

Multicalor 70 & 100 Parts List (Continued)

Multicalor 120 & 140 Parts List

Multicalor 120 & 140 Parts List (Continued)