Ecoflam OILFLAM 120.1 AB User Manual

BRUCIATORI DI OLIO DENSO / HEAVY OIL BURNERS
BRULEURS A FIOUL LOURD/QUEMADORES DE FUEL PESADO
OILFLAM 50.1 AB
OILFLAM D 50.1 AB
OILFLAM 80.1 AB
OILFLAM D 80.1 AB
OILFLAM 120.1 AB
OILFLAM D 120.1 AB
OILFLAM 170.1 AB
OILFLAM D 170.1 AB
OILFLAM 200.1 AB
OILFLAM D 200.1 AB
MOTORIDUTTORE / AIR DAMPER MOTOR
SERVOMOTEUR / MOTORREDUCTOR
230 / 400 V 50 Hz
LB 408
10.11.2006

Ecoflam OILFLAM 120.1 AB Specifications

General

Fuel	Light Oil
Voltage	230 V
Frequency	50 Hz
Motor Power	0.25 kW
Type	Oil burner

Summary

Technical Data

Specifications and Models

Detailed technical specifications and model variations for the burners.

Overall Dimensions

Burner Installation

Working Fields

Heavy Oil Feeding

Pump Pressure / Oil Temperature Diagram

Heavy Oil Feed System Diagram

Nozzle Output Table for Heavy Oil

Installation Checks

Pre-installation System Checks

Steps before filling the fuel system and burner start-up.

Burner Operation

Landis LMO 44 Control Information System

Error Code List and Causes

Table listing error codes and their possible causes for the Landis LMO 44 system.

Pressure Adjustment

Prepurging Phase Pressure Adjustment

How to set pressure during the initial burner prepurging cycle.

Pump Pressure Adjustment

Instructions for adjusting the main fuel pump pressure.

Prepurging Phase Diagram and Legend

Air Damper Servomotor Adjustment

Fuel Thermostat Adjustment

Ignition Electrode Position

Filter Cleaning and Maintenance

Filter Removal

Step-by-step guide on how to safely remove the filter for cleaning.

Burner Mounting

Troubleshooting

Burner Start and Ignition Failures

Covers issues preventing burner start-up or initial ignition.

Operational Lock-out and Stage Transition Issues

Problems causing lockout during operation or failure to reach high flame.

Oil Pressure and Feed Problems

Issues related to low or irregular fuel oil pressure and feed.