EasyManua.ls Logo

EcoFlow BLADE - Powering the Mower On and Off

EcoFlow BLADE
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Po
wer on/off
Normally, the mower will power on automatically when it's connected to the charging pads of
the charging station. Once it's turned on, you'll hear the voice prompt "Power on, let's start a
new journey".
When the mower is not on the charging station, you can turn it on by holding the power button
for at least 3 seconds until the tail light pulses blue.
- Scenario 1
- Scenario 2
To turn off the mower, back up the mower from the charging station and then press and
hold the po
wer button for about 3 seconds until you hear the voice prompt "Power off.
Look forward to working for you again".

Other manuals for EcoFlow BLADE