36
Residual risks
In order to reduce risks, wear gloves when replacing blades. Follow the instructions and
warnings in this manual, but risks cannot be eliminated completely.
Blades
1
2
3
1. Turn off the mower
2. Turn the mower over and put it on a soft and at surface.
3. Loosen the three screws and then remove the blades.
4. Replace with new blades and screws.
If the mower is used on a regular basis, we suggest that you change the blades and screws
every 1 to 2 months to ensure a safer performance.
1. Wear protective gloves when you inspect or replace the blades.
2. Do not reuse the screws.
3. Use the original spare blade and screws supplied by EcoFlow.
To Next Page
Loading...
