EasyManua.ls Logo

EcoFlow BLADE - Page 44

EcoFlow BLADE
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
Connectivity
Bluetooth frequency 2,400-2,483.5 MHz
WiFi frequency 2,400-2,483.5 MHz/5,725-5,850 MHz
Cellular network
Europe
LTE-FDD: B1/B3/B7/B8/B20/B28
North America
WCDMA: B2/B4/B5
LTE-FDD: B2/B4/B5/B12/B13/B25/B26
Disc
parameters
Rated speed
Gentle: 0.4 m/s
Normal: 0.6 m/s
Quick: 0.8 m/s
Maximum speed 0.8 m/s
Drive mode Direct-drive hub motor
Blade motor
Rated speed 2,800 rpm
Maximum speed 3,000 rpm
Motor type Brushless motor
Battery
Battery type Lithium-ion battery
Nominal capacity 21.6V
Nominal capacity 298Wh
Protection system
Over-heat, short-circuit, over-current, over-
voltage, under-voltage
Charging
station
Input voltage 36 V
Input current 5 A
Output voltage Max. 25.2 V DC
Output current Max. 7A
Other
Front wheel 200 mm (7.9 in.) omnidirectional wheel
Rear wheel
Hub motor with rubber tyres
Sensor
IM sensor, Lift sensor, rain sensor, wheel
encoder, RGB-D camera
Vertical obstacle crossing
ability
40 mm (1.6 in.)
1. The above data was measured in a laboratory and is for reference only.
2. The noise emission declar
ations conform to EN 50636-2-107 and ANSI/OPEI
60335-2-107.
3. The manufacturer reserves the right to make modications without notice, please
go to www.ecoow.com for the latest specications or related documents.

Other manuals for EcoFlow BLADE