24-29.2Vdc
30A Max
Default 26V-27Vdc 8A Max(Charging voltage could be adjusted on APP)
24V lead-acid battery (
200Ah) / 24V lithium iron phosphate battery
14-140°F +/-5°F(-10-60°C +/-3°C)
32-113°F +/-5°F(0-45°C +/-3°C)
APP Settings
Voltage Range
Maximum Discharge Current
Charging Voltage
Cell Type
Discharge Temperature
Charging Temperature
Recommended Battery Type
The default charging voltage of the
device is 26-27V. Under this setting,
thebattery will not be fully charged.
Users will need to select the battery
type and fill in the under-voltage value,
over-voltage value and max capacity on
the APP manually before use. If two
pieces of 12V are connected in series, for
example, two sets of 12V lead-acid
batteries with following specifications:
Highest charging voltage:13.6V
Lowest discharging voltage:10.5V
Capacity: 200Ah
Then when you connect the two
batteries in series, the specifications to
fill in the APP will be:
-Over-voltage value: 27.2V
-Under-voltage value: 21V
-Maximum capacity: 200Ah
To Next Page
Loading...
